How to Fix an Exterior Pot Hole as Part Concrete Driveways

Concrete driveways often get damaged due to cracks and potholes because water gets jammed under the driveway. If you don’t want to get your tires damaged then you need to fix an exterior pot hole as part concrete driveways. The exterior state of the exterior concrete on the driveway of your premises will create an impression on any visitor. With the emergence of potholes; it will not give you the smooth ride of your dreams, and you will not be proud of it when visitors came calling. The issues with it can be resolved through the do-it-yourself concrete driveway. You need to get regular maintenance of your concrete driveways if you don’t want to see cracks and potholes. You need to let the concrete dry for a long period of time it can completely stick to the surface. If you think it is a technical job for the experts; the following easy to achieve steps will prove to the contrary. Here we go:

Concrete Driveways

Clean the Driveway Thoroughly

Get water mixed in an all-purpose detergent in a bucket. Clean the concrete driveway with the solution by scrubbing it on the driveway. Make sure you get the job effectively done because it is the foundation laying aspect which must be substantial. If there are stubborn deposits that refuse to go with the scrubbing; then use a chemical degreaser to get rid of the deposits that are stubborn. You can now move to the next stage.

The Target Areas for Repairs

You now have the grey areas that are giving you worries which led you to carry out the concrete driveways exercise; next, chip away all the loose concrete around the area that will make a mockery of your efforts. Take your time to clear the base of the trouble spots very well of any rubble of concrete if you do not want to repeat the exercise very soon. What happens next? Let us see below.

How Much Do You Need?

You have to get your stats right to avoid unnecessary wastage or the embarrassment of a shortfall in raw materials. To be certain of the exact amount of compound that you will need, you can use a straightedge. It is recommended that you use a straight two-by-four. Lay it on the depression and visualize the distance between the two-by-four and the bottom of the depression. You will get an inkling of how much leveling compound that you will need.

Mixing of Mortar and Cement

The next step will be to mix mortar and cement. You are to ensure that you obtain a paste that is thick enough to get the job done. The amount that you are going to mix should be enough to fill the patch that necessitated the concrete driveways in the first place. The thickness should be such that it will stick on the trowel when you pick it up with it.

Now, trowel the mixture into the depression and expertly ensure that it goes right down into the depression. You have to provide proper leveling before the paste hardens up if you are to avoid another issue of contours on your driveway. That done, you can now move to the next stage of your concrete driveways.

Conclusion

The job is almost done at this stage. What remains to be done is to feather the edges of the patch. This will be into the surrounding surface. Finally, avoid the patch for at least two days (48 hrs.) before human or vehicular movement is allowed on it.